Canon Color imageCLASS MF641Cw Color imageCLASS MF644Cdw/MF642Cdw/MF641Cw Gett - Page 34

Appendix When transporting the machine Consumables • Except when necessary, do not take out the To prevent damage to the machine during transport, perform the following. • Remove the toner cartridges. • Securely pack the machine in the original box with packing materials. Safety-Related Symbols Power switch: "ON" position Power switch: "OFF" position Power switch: "STAND-BY" position Push-push switch "ON" "OFF" WARNING • Do not dispose of used toner cartridges or the like in open flames. Also, do not store toner cartridges or paper in a location exposed to open flames. This may cause the toner to ignite, and result in burns or fire. • If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a soft, damp cloth in a way that prevents inhalation. Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled toner. Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion toner cartridge from the packing material or from this machine. • The toner cartridge is a magnetic product. Do not move it close to products susceptible to magnetism including floppy disks and disk drives. Doing so may result in data corruption. Storing the toner cartridge • Store in the following environment to ensure safe and satisfactory use. Storage temperature range: 32 to 95°F (0 to 35°C) Storage humidity range: 35 to 85% RH (relative humidity/no condensation)* • Store without opening until the toner cartridge is to be used. Protective earthing terminal Dangerous voltage inside. Do not open covers other than instructed. CAUTION: Hot surface. Do not touch. Class II equipment Moving parts: Keep body parts away from moving parts CAUTION: An electrical shock may occur. Remove all the power plugs from the power outlet. There are sharp edges. Keep body parts away from sharp edges. [NOTE] Some of symbols shown above may not be affixed depending on the product. Maintenance and Inspections Clean this machine periodically. If dust accumulates, the machine may not operate properly. When cleaning, be sure to observe the following. If a problem occurs during operation, see "Troubleshooting" in the User's Guide. If the problem cannot be resolved or you feel the machine requires an inspection, see "When a Problem Cannot Be Solved" in the User's Guide. WARNING due to static discharge. CAUTION • Use caution not to inhale any toner. If you should inhale toner, consult a physician immediately. • Use caution so that toner does not get into your eyes or mouth. If toner should get into your eyes or mouth, immediately wash with cold water and consult a physician. • Use caution so that toner does not come into contact with your skin. If it should, wash with soap and cold water. If there is any irritation on your skin, consult a physician immediately. • Keep the toner cartridges and other consumables out of the reach of small children. If toner is ingested, consult a physician or poison control center immediately. • Do not disassemble or modify the toner cartridge or the like. Doing so may cause the toner to scatter. • When removing the sealing tape from the toner cartridge, pull it out completely but without using excessive force. Doing otherwise may cause the toner to scatter. IMPORTANT Handling the toner cartridge • Be sure to hold the toner cartridge using the handle. • When removing the toner cartridge from this machine for storage, place the removed toner cartridge in the original packing material. • When storing the toner cartridge, do not store it upright or upside down. The toner will solidify and may not return to its original condition even if it is shaken. * Even within the storable humidity range, water droplets (condensation) may develop inside the toner cartridge if there is a difference of temperature inside and outside the toner cartridge. Condensation will adversely affect the print quality of toner cartridges. Do not store the toner cartridge in the following locations • Locations exposed to open flames • Locations exposed to direct sunlight or bright light for five minutes or more • Locations exposed to excessive salty air • Locations where there are corrosive gases (i.e. aerosol sprays and ammonia) • Locations subject to high temperature and high humidity • Locations subject to dramatic changes in temperature and humidity where condensation may easily occur • Locations with a large amount of dust • Locations within the reach of children • Before cleaning, turn OFF the power and Be careful of counterfeit toner cartridges unplug the power plug from the AC power • Please be aware that there are counterfeit outlet. Failure to do so may result in a fire or Canon toner cartridges in the marketplace. electrical shock. Use of counterfeit toner cartridge may result in • Unplug the power plug periodically and clean poor print quality or machine performance. with a dry cloth to remove dust and grime. Canon is not responsible for any malfunction, Accumulated dust may absorb humidity in the accident or damage caused by the use of air and may result in a fire if it comes into counterfeit toner cartridge. contact with electricity. For more information, see global.canon/ctc. • Use a damp, well wrung-out cloth to clean the machine. Dampen cleaning cloths with water Availability period of repairing parts and toner only. Do not use alcohol, benzine, paint cartridges and the like thinner, or other flammable substances. Do • Do not touch the toner cartridge memory • The repairing parts and toner cartridges and En not use tissue paper or paper towels. If these substances come into contact with electrical ( ) or the electrical contacts ( ). To avoid scratching the surface of the drum inside the the like for the machine will be available for at least seven (7) years after production of this parts inside the machine, they may generate machine or exposing it to light, do not open machine model has been discontinued. static electricity or result in a fire or electrical the drum protective shutter ( ). Toner cartridge packing materials shock. • Save the packing materials for the toner • Check the power cord and plug periodically for damage. Check the machine for rust, dents, scratches, cracks, or excessive heat generation. Use of poorly-maintained equipment may result in a fire or electrical shock. a Bottom View c b cartridge. They are required when transporting this machine. • The packing materials may be changed in form or placement, or may be added or removed without notice. CAUTION • The inside of the machine has hightemperature and high-voltage components. Touching these components may result in burns. Do not touch any part of the machine that is not indicated in the manual. • When loading paper or removing jammed paper, be careful not to cut your hands with the edges of the paper. • After you pull out the sealing tape from the toner cartridge, dispose of it in accordance with the applicable local regulations. When disposing of a used toner cartridge or the like • When discarding a toner cartridge or the like, place it in the original packing material to prevent toner from scattering from inside, and dispose of it in accordance with the applicable local regulations. 34