Canon Color imageCLASS X MF1127C Getting Started Guide - Page 23

CAUTION Install this machine near the power outlet and leave sufficient space around the power plug so that it can be unplugged easily in an emergency. Laser Safety Caution IMPORTANT When connecting power • Do not connect the power cord to an uninterruptible power source. Doing so may result in malfunction of or damage to the machine at power failure. • If you plug this machine into an AC power outlet with multiple sockets, do not use the remaining sockets to connect other devices. • Do not connect the power cord to the auxiliary AC power outlet on a computer. Other precautions Electrical noise may cause this machine to malfunction or lose data. IMPORTANT • Follow the caution instructions on labels and the like found on this machine. Handling • Do not subject the machine to strong shocks or vibration. Feeder • Do not forcibly open and close doors, covers, WARNING • Do not press down hard on the feeder when and other parts. Doing so may result in • Immediately unplug the power plug from the AC power outlet and contact an authorized Canon dealer if the machine makes an unusual noise, emits an unusual smell, or emits smoke or excessive heat. Continued use may result in a fire or electrical shock. • Do not disassemble or modify this machine. There are high-voltage and high-temperature using the platen glass to make copies of thick books. Doing so may damage the platen glass and result in personal injury. • Close the feeder gently to avoid catching your hands, as this may result in personal injury. • Be careful not to put your hands or fingers into the feeder. Otherwise, you may be injured. damage to the machine. • Do not turn the main power switch OFF or open the covers while the machine is in operation. This may result in paper jams. • Use a modular cable that is shorter than 3 meters. • Use a USB cable that is shorter than 3 meters. components inside the machine. Disassembly or modification may result in a fire or electrical shock. Safety-Related Symbols • Place the machine where children will not come in contact with the power cord and other cables or gears and electrical parts inside the machine. Failure to do so may result in Power switch: "ON" position Power switch: "OFF" position unexpected accidents. • Do not use flammable sprays near this Power switch: "STAND-BY" position machine. If flammable substances come into Paper drawer Push-push switch "ON" "OFF" En contact with electrical parts inside this • Do not insert your hand into the machine Protective earthing terminal machine, it may result in a fire or electrical shock. • When moving this machine, be sure to turn while the paper drawer is removed, as this may result in personal injury. Dangerous voltage inside. Do not open covers other than instructed. OFF the power of this machine, and then unplug the power plug and interface cables. Failure to do so may damage the power cord Energy Saver key • Press (Energy Saver) for safety when the machine will not be used for a long period of CAUTION: Hot surface. Do not touch. Class II equipment or interface cables, resulting in a fire or time, such as overnight. Also, turn OFF the Moving parts: Keep body parts away from electrical shock. main power switch, and disconnect the power moving parts • When plugging or unplugging a USB cable when the power plug is plugged into an AC power outlet, do not touch the metal part of the connector, as this may result in an electrical shock. cord for safety when the machine will not be used for an extended period of time, such as during consecutive holidays. Laser Safety This product is confirmed as a Class 1 laser CAUTION: An electrical shock may occur. Remove all the power plugs from the power outlet. There are sharp edges. Keep body parts If you are using a cardiac pacemaker product in IEC60825-1:2014 and EN60825-1:2014. away from sharp edges. This machine generates a low level magnetic flux CLASS 1 LASER PRODUCT [NOTE] and ultrasonic waves. If you use a cardiac LASER KLASSE 1 Some of symbols shown above may not be pacemaker and feel abnormalities, please move APPAREIL À LASER DE CLASSE 1 affixed depending on the product. away from this machine and consult your APPARECCHIO LASER DI CLASSE 1 physician immediately. CAUTION • Do not place heavy objects on this machine as they may fall, resulting in injury. • For safety, unplug the power plug if the machine will not be used for a long period of time. • Use caution when opening and closing covers to avoid injury to your hands. • Keep hands and clothing away from the rollers in the output area. If the rollers catch your hands or clothing, this may result in personal injury. • The inside of the machine and the output slot are very hot during and immediately after use. Avoid contact with these areas to prevent burns. Also, printed paper may be hot immediately after being output, so use caution when handling it. Failure to do so may result in burns. PRODUCTO LÁSER DE CLASE 1 APARELHO A LASER DE CLASSE 1 LUOKAN 1 LASER-TUOTE LASERPRODUKT KLASS 1 The laser beam can be harmful to human bodies. Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. Read the following remarks and instructions for safety. • Never open covers other than those instructed in the manuals for this machine. • If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes. • Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. Maintenance and Inspections Clean this machine periodically. If dust accumulates, the machine may not operate properly. When cleaning, be sure to observe the following. If a problem occurs during operation, see the User's Guide. 23