Canon DC22 DC22 Instruction Manual - Page 72
Unfinalizing the Disc, Additional Recordings on a, Finalized Disc
UPC - 013803063660
View all Canon DC22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
72 Playing Back your Disc on a DVD Player or a Computer's DVD Drive After finalizing the disc you can play it on DVD players compatible with the type of disc you used (DVD-R, DVD-R DL or DVD-RW). For details about disc compatibility refer to the instruction manual of the DVD player or DVD drive. On a DVD Player 1 Turn on the TV and DVD player. 2 Insert a finalized disc in the DVD player. 3 Select the scene you want to play from the index screen. On a Computer's DVD Drive 1 Insert a finalized disc in the DVD drive. 2 Run the DVD playback software. • Refer also to the instruction manual and help modules of your DVD playback software. • To view still images recorded on the disc, close first any DVD playback software that may be running. NOTES DVD-RW discs recorded in VR mode can only be played on VR mode-compatible DVD players. Depending on your DVD device you may not be able to play the disc. In order to view the still images recorded on the disc in a DVD player, you have to convert individual images to scenes, or create a Photomovie scene ( 68) before finalizing the disc. The resolution of Photomovie scenes will be lower than that of the original still images. In order to play the disc on a computer you need to have DVD playback software installed and running. Also, in order to play back a DVD-R DL you must have a DVD drive capable of reading dual-layered DVD discs. Unfinalizing the Disc Additional Recordings on a Finalized Disc Unfinalize a disc to allow recording additional movies on the disc even after it was finalized. POINTS TO CHECK Disc type: mode. ( 13) DVD-RW initialized in VIDEO IMPORTANT Be sure to unfinalize the disc in normal room temperatures. If the procedure was not completed correctly due to high temperature, let the camcorder cool off before resuming operation. Place the camcorder on a table or other stable surface before starting the procedure. Subjecting the camcorder even to slight impacts (for example to place it on a table or to disconnect the AV cable) after the unfinalization process started may result in permanent data loss. Always power the camcorder using the compact power adapter. The operation cannot be started if the camcorder is powered only with the battery pack. Avoid the following actions while the operation is in progress. Failing to do so can interrupt the process and result in permanent data loss. - Do not move the camcorder. - Do not disconnect the compact power adapter. Only discs that were finalized using this camcorder can be unfinalized with it.