Canon DC22 DC22 Instruction Manual - Page 90
Troubleshooting
UPC - 013803063660
View all Canon DC22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
90 Trouble? Additional Information Trouble? Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Solution • Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery pack. 21 • The camcorder switches off by itself. • The disc compartment cover will not open. Attach the battery pack correctly. • LCD/viewfinder switches on and off. Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and - 40 °C (32 °F and 104 °F). Battery packs become hot with use and may not charge. The - charging will start once the battery pack temperature is below 40 °C (104 °F). The battery pack is damaged. Use a different battery pack. - Recording/Playback Problem Solution Buttons will not work. Turn on the camcorder. - Load a disc. 25 Abnormal characters appear on Disconnect the power source and reconnect it after a short time. - the screen. The camcorder If the problem still persists, disconnect the power source and does not operate properly. press the RESET button with a pointed item. Pressing the RESET button resets all settings. " " flashes on the screen. Load a disc. 25 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery pack. 21 The wireless controller will not Set [WL.REMOTE] to [ON]. 42 work. The battery of the wireless controller is exhausted. Replace the 23 battery. Video noise appears on screen. When using the camcorder in a room where a plasma TV is - located, keep a distance between the camcorder and the plasma TV. Video noise appears on the TV When using the camcorder in a room where a TV is located, - screen. keep a distance between the compact power adapter and the power or antenna cables of the TV. Even without a disc loaded, when closing the disc compartment cover a motor sound can be heard. The camcorder is checking if a disc is loaded or not. This is not a - malfunction.