Canon EOS 5D Mark II Instruction Manual - Page 151
Custom Function Settings
UPC - 013803105384
View all Canon EOS 5D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
3 Custom Function SettingsN C.Fn-01 SET function when shooting You can change the function assigned to . 0: Default (no function) 1: Change quality After pressing , look at the LCD panel and turn the dial to set the recording quality directly. 2: Change Picture Style Press the button to display the Picture Style selection screen on the LCD monitor. Turn the dial to select the desired Picture Style, then press . 3: Menu display Gives the same function as the button. 4: Image replay Gives the same function as the button. C.Fn-02 Long exp. noise reduction 0: Off 1: Auto noise reduction For 1 sec. or longer exposures, noise reduction is performed automatically if long exposure noise is detected. Setting this to [Auto noise reduction] is very effective. 2: On Noise reduction is performed for all exposures 1 sec. or longer. Setting this may reduce the noise even for exposures which would not have been noise detected/reduced at the [Auto noise reduction] setting. After the exposure, noise reduction may take the same amount of time as the exposure time. While the noise reduction is in progress, image playback and menu operation are not possible. However, you can still shoot as long as the maximum burst indicator in the viewfinder shows "1" or higher. C.Fn-03 Flash sync. speed in Av mode 0: Auto 1: 1/200sec. (fixed) Sets the flash sync speed to 1/200 sec. in the aperture-priority AE (Av) mode. (Against dark backgrounds such as the night sky, the subject's background will look dark.) 151