Canon EOS C700 GS PL EOS C700 EOS C700 PL EOS C700 GS PL EOS C700 FF EOS C700 - Page 4

Options Applied LUT [BT.709] [BT.2020]1 [DCI]1 Output Settings with LUT applied Gamma curve Color space Wide DR BT.709 Wide DR BT.2020 DCI DCI-P3 [ACESproxy]1 ACESproxy ACESproxy [HDR-PQ (OOTF On)]1, 2, 3 [PQ (OOTF On)] [HDR-PQ (OOTF Off)]1, 2, 3 [PQ (OOTF Off)] BT.2020 Description LUT for viewing on the optional viewfinder and external monitors compatible with BT.709 specifications. LUT for viewing on external monitors compatible with ITU-R BT.2020 standards, which define parameters for ultra-high-definition television (4K/8K). LUT for viewing on external monitors that support color spaces and gamma curves that follow the guidelines established by DCI (Digital Cinema Initiatives). LUT for viewing on external monitors compatible with the ACESproxy standard established by ACES (Academy Color Encoding System). The signal output will use full range coding. LUT for viewing HDR (high dynamic range) images on external monitors compatible with the PQ standard defined by ITU-R BT.2100 standards. The signal output will use narrow range (video range) coding. Select [PQ (OOTF On)] for deeper blacks and higher contrast. [HDR-HLG]1 Hybrid Log-Gamma [HDR 1600% (OOTF On)]3, 4, [HDR 1600% (OOTF Off)]3, 4 [HDR 400% (OOTF On)]3, 4, [HDR 400% (OOTF Off)]3, 4 Original gamma curve [Off] - BT.2020 BT.709 - LUT for viewing HDR images on external monitors compatible with the HLG standard defined by ITU-R BT.2100 standards. The signal output will use narrow range (video range) coding. LUT for viewing HDR (high dynamic range) images on the optional viewfinder and other monitoring devices. The LUT follows the ITU-R BT.2100 transfer function to convert a brightness range of 1600% or 400% respectively into a linear brightness scale. Select [(OOTF On)] for deeper blacks and higher contrast. No LUT applied. 1 Not available for the VIDEO terminal (optional viewfinder). 2 For the HDMI OUT terminal, this option is only available when [System Setup] > [Term. Output Setup] > [HDMI Max Res.] is set to [1920x1080]. 3 "OOTF" refers to the opto-optical transfer function defined by the ITU-R BT.2100 standard. 4 Only available for the VIDEO terminal (optional viewfinder). NOTES • When you apply the [ACESproxy] LUT to the SDI OUT terminals, MON. terminals or HDMI OUT terminal, the selected terminal will output ACESproxy video data. Using a compatible monitor*, you can perform on-set color grading and check the image after color correction as you continue shooting (A 2). * When using the HDMI OUT terminal, a monitor that supports full range YCbCr quantization is required. • If you set an assignable button to [LUT], you can press the button to turn on and off the LUTs applied to all video outputs at once. • If you change the [Gamma] or [Color Space] settings in the custom picture file, all the LUT settings will be reset to [Off]. The information in this document is verified as of June 2018. Subject to change without notice. Visit your local Canon website to download the latest version of the complete Instruction Manual. © CANON INC. 2018 4