Canon EOS Rebel T5 18-55 IS II Kit Instruction Manual - Page 244
Set the printing effects image, optimization., Contents displayed on the screen
View all Canon EOS Rebel T5 18-55 IS II Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
w Printing 4 Set the printing effects (image optimization). Set them if necessary. If you do not need to set any printing effects, go to step 5. Contents displayed on the screen differ depending on the printer. Select the option, then press . Select the desired printing effect, then press . If the icon is displayed brightly next to , you can also adjust the printing effect (p.246). Printing Effect EOn EOff EVivid ENR 0 B/W 0 Cool tone 0 Warm tone zNatural zNatural M EDefault Description The image will be printed using the printer's standard colors. The image's Exif data is used to make automatic corrections. No automatic correction will be applied. The image will be printed with higher saturation to produce more vivid blues and greens. Image noise is reduced before printing. Prints in black-and-white with true blacks. Prints in black-and-white with cool, bluish blacks. Prints in black-and-white with warm, yellowish blacks. Prints the image in the actual colors and contrast. No automatic color adjustment is applied. The printing characteristics are the same as the "Natural" setting. However, this setting enables finer printing adjustments than with "Natural". The printing will differ depending on the printer. For details, refer to the printer's instruction manual. * When you change the printing effects, changes are reflected in the image displayed on the upper left of the screen. Note that the printed image may look slightly different from the displayed image, which is only an approximation. This also applies to [Brightness] and [Adjust levels] on page 246. 244