Canon Elura 60 Digital Video Software (Windows) Ver.11 Instruction Manual - Page 17
Connect the power adapter to the camcorder. - device driver
UPC - 013803040166
View all Canon Elura 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Connecting the Camcorder to a Computer ❍ Make sure the camcorder is being powered using the power adapter before connecting it to a computer. ❍ Be sure to install the Digital Video Software before you connect the E camcorder to the computer. ❍ Connect the USB cable directly to one of the computer's main USB ports. The interface may not function correctly if the camcorder is connected via a USB hub. ❍ The connection may not operate correctly if you are using other USB devices, excluding USB mice or keyboards, at the same time. If this occurs, disconnect the other devices from the computer and try reconnecting the camcorder. ❍ Do not connect two or more camcorders to the computer. The camcorders may not operate normally. ❍ Never allow the computer to go into standby (sleep) mode while a camcorder is connected via the USB interface. If it does happen, never disconnect the USB cable. Try to awaken the computer with the camcorder in the connected state. Some computers will not awaken properly if you disconnect the camcorder while they are in standby mode. Please refer to your computer manual for instructions regarding its standby mode. Windows ❍ Refer to your computer manual for the location of the computer's USB ports. ❍ See your camcorder instruction manual for connecting instructions. 1. Insert a memory card containing images into the camcorder. 2. Connect the power adapter to the camcorder. 3. Turn the POWER switch to PLAY (VCR) and move the TAPE/ CARD switch to CARD. Wait until the card access indicator stops flashing. 4. Attach the supplied USB cable to the computer's USB port and the camcorder's USB Terminal. • The first time you connect the camcorder to the computer: - Installation of the DV TWAIN Driver (Windows 98/Windows 2000) or the DV WIA Driver (Windows Me) starts. - If the "Digital signature not found" message appears, click [Yes]. - After a few moments, a message such as "New Hardware Found" appears and the driver will be installed automatically. - If you are prompted to restart the computer, restart the computer. 17