Canon FAX-JX210P Easy Setup Instructions - Page 1
Canon FAX-JX210P Manual
View all Canon FAX-JX210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Start Here Easy Setup Instructions Note Please note that the illustrations of the fax in this guide may differ from your model. 1 Prepare the Machine a Unpack the Machine. Confirm the included items against the illustration printed on the lid of the packing box. b Open the Cover and remove the protective materials. e Plug the power cord into the back of the machine and connect the other end to a power outlet. Important When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to "Cleaning Your Machine" in "Routine Maintenance" of the User's Guide. 2 Install the FINE Cartridge 3 Loading Paper a Lift the Cover until it locks into place. d Insert the FINE Cartridge slightly slanted into the Holder. Important • Make sure the machine is turned on and [ON] lights green. • Make sure the Holder has moved to the left. a Open the Document Cover and extend the Paper Support to support the paper. Note The actual protective materials may differ in shape, quantity, and position from the ones shown in the illustration above. c Connect the Handset to the jack, and place it in its cradle. There is a groove on the bottom of the machine to hold the Handset Cord. d Connect the telephone line and any necessary external device. For more details, see "Step 5" on the back of this sheet. f Press [ON], wait until the LCD displays , then press [Start/Copy]. SELECT LANGUAGE b When the Cover is opened, the Holder will move to the left. e Push up the FINE Cartridge until it clicks into place. Important If the Holder moves to the right side, close and reopen the Cover to return the Holder to the left. Press [Start/Copy]. g Use [{] or [}] on the Operation Panel to select the language for the LCD, then press [Start/Copy]. Caution Do not touch internal parts other than the Holder. c Prepare the FINE Cartridge. DO NOT put the head of the FINE Cartridge downward into the Holder. Press [Start/Copy]. Remove the FINE Cartridge from its package. f Close the Cover. b Squeeze, then slide the Paper Guide to the left. c Tap the edge of the stack on a flat surface to even the stack. d Insert the stack face up into the Rear Tray , and align the right edge of the stack with the right side of the Rear Tray. Then slide the Paper Guide snugly against the left edge of the stack. Be careful not to press the Paper Guide strongly against the stack, or the paper will not be fed properly. You can connect an external device (telephone or answering machine) if necessary. Connect the telephone line cord to the wall jack. Important Be sure to use supplied telephone line cable. Remove the protective tape. When doing so, DO NOT TOUCH the metallic areas. Wait until the preparation operation is completed: this takes about one to two minutes. Turn Over For the instructions for Setting Receive Mode, Connecting the Machine, and Software Installation. Before using your machine, enter the date and time correctly. For details, refer to "Entering the Date and Time" in "Before Using Your Machine" of the User's Guide. Note • If an error message is displayed on the LCD, refer to "LCD Messages" in "Troubleshooting" of the User's Guide. • The machine may make some operating noises when preparing to print. This is normal operation.