Canon FS10 FS11, FS10, and FS100 Instruction Manual - Page 56
Erasing a Photo Right After Recording It, Basic Playback, Viewing Photos, Image Jump Function
UPC - 013803092523
View all Canon FS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Photos Erasing a Photo Right After Recording It Basic Playback You can erase the still image recorded last while reviewing it within the time set for the [REVIEW] option or immediately after recording it, if [REVIEW] is set to [ OFF]. ( 24) Viewing Photos ( 24) While reviewing the image immediately after recording: 1 Push the joystick ( ) toward . 2 Select ( ) [ERASE] and press . 1 Set the mode dial to . 2 Turn on the camcorder. 3 Push the joystick ( ) to move between images. Push the joystick ( ) and hold it down to run quickly through the still images. Image Jump Function When you have recorded a large number of still images, you can jump 10 or 100 still images at a time. 1 Press guide. to display the joystick 56
Photos
56
Erasing a Photo Right After Recording It
You can erase the still image recorded
last while reviewing it within the time set
for the [REVIEW] option or immediately
after recording it, if [REVIEW] is set to
[
OFF].
While reviewing the image immediately
after recording:
1
Push the joystick (
) toward
.
2
Select (
) [ERASE] and press
.
Viewing Photos
1
Set the mode dial to
.
2
Turn on the camcorder.
3
Push the joystick (
) to move
between images.
Push the joystick (
) and hold it
down to run quickly through the still
images.
Image Jump Function
When you have recorded a large
number of still images, you can jump 10
or 100 still images at a time.
1
Press
to display the joystick
guide.
(
24)
Basic Playback
(
24)