Canon FS10 FS11, FS10, and FS100 Instruction Manual - Page 91
Could Not Print X Images, Ink Absorber Full
UPC - 013803092523
View all Canon FS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
COMMUNICATION ERROR - The printer is experiencing a data transfer error. Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable. When you are printing using the button, check the print settings. Or, you attempted to print from a memory card that contains a large number of images. Reduce the number of images. COULD NOT PRINT X IMAGES - You attempted to use the print order settings to print X images that were recorded with another camcorder, with a different compression or were edited on a computer. FILE ERROR - You attempted to print an image that was recorded with another camcorder, has a different compression, or was edited on a computer. HARDWARE ERROR - Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the printer is equipped with a battery, it might be exhausted. In such case, turn off the printer, replace the battery and turn it back on. INCOMPATIBLE PAPER SIZE - The paper settings of the camcorder conflict with the printer's settings. INK ABSORBER FULL - Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber. INK ERROR - There is a problem with the ink. Replace the ink cartridge. LOW INK LEVEL - The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing. NO INK - The ink cartridge is not inserted or is out of ink. NO PAPER - Paper is not correctly inserted or there is no paper. NO PRINTHEAD - No print head is installed in the printer or the print head is defective. PAPER ERROR - There is a problem with the paper. The paper is not correctly loaded or the paper size is wrong. Alternatively, if the paper output tray is closed, open it to print. PAPER JAM - The paper jammed during printing. Select [STOP] to cancel printing. After removing the paper, set some paper again and retry printing. PAPER LEVER ERROR - Paper lever error occurred. Adjust the paper selection lever to the proper position. 91