Canon HV40 VIXIA HV40 Instruction Manual - Page 41
STD PLAY], 12bit], AUTO], 2sec] - external mic
UPC - 705105064512
View all Canon HV40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Menu Options Lists 41 During the playback of a recording made in [ HDV(PF30)], [ HDV(PF24)] or [ HDV(24F)], will appear on the screen (not , or ). Playing back a widescreen recording: TV sets compatible with the Video ID-1 system will automatically switch to wide (16:9) mode. Otherwise, change the aspect ratio of the TV manually. To play back on a TV with normal aspect ratio (4:3) change the [TV TYPE] setting accordingly ( 43). DV REC MODE DV DV AUDIO DV [ 16bit], [ 12bit] When [HD STANDARD] is set to one of the DV standards, you can change the audio quality. [ 16bit]: To record sound at the highest quality. [ 12bit]: If you will dub audio or add a music track later with an external device. WIND SCREEN [ STD PLAY], [ LONG PLAY] When [HD STANDARD] is set to one of the DV standards, you can change the video quality and as a result, also the recording time available on the tape. Recording in LP mode extends the available recording time on the tape 1.5 times. Depending on the condition of the tape (long usage, imperfections, etc.) you may notice some video problems (blocky video artifacts, banding, etc.) in the playback picture when playing back recordings made in LP mode. We recommend using the SP mode for important recordings. If you make recordings in both SP and LP modes on the same tape, during playback you may notice some video problems in the picture at the point where the recording mode changes. When playing back in this camcorder tapes recorded in LP mode with other devices or vice versa, you may notice some problems in the playback picture or the sound may stop briefly. Mode switch: [ AUTO], [ OFF ] The camcorder automatically reduces the background sound of wind when recording outdoors. The wind screen cannot be turned off when the mode switch is set to . MIC ATT ( 65) [ ON], [ REVIEW OFF] [ OFF], [ 2sec], [ 4sec], [ 6sec], [ 8sec], [ 10sec] Selects the time to display a still image after it has been recorded. You can erase ( 69) the still image while you are reviewing it (or immediately after recording it, if set to [ OFF]). Advanced Functions