Canon LC-830I Getting Started Guide
Canon LC-830I - LASER CLASS FACSIMILE Manual
 |
UPC - 013803067484
View all Canon LC-830I manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon LC-830I manual content summary:
- Canon LC-830I | Getting Started Guide - Page 1
Starter Guide %.' - Canon LC-830I | Getting Started Guide - Page 2
Set Up the Machine Before Setting Up the Machine ˔ Remove all shipping tape on the machine. ˔ When moving the machine, be sure at least two people carry it using the provided hand grips on the left and right sides, as seen in the illustration right. - Canon LC-830I | Getting Started Guide - Page 3
Warranty Notice ˔ User Manual CD (Reference Guide) ˔ User Software CD**** ˔ Unpacking Instructions ˔ Registration Card ˔ Basic Operation Guide * Included with the optional handset. (See "Install Handset (Optional)," on p. 10.) ** Use by attaching to a USB cable. Included with the LASER CLASS 830i - Canon LC-830I | Getting Started Guide - Page 4
and instructions ˔ Fax Driver Guide (located on the User Software CD): Fax driver installation and instructions Assistance: If you have a problem with your machine and you cannot solve it by referring to the manuals listed above, please contact our Canon Authorized Service Facilities or the Canon - Canon LC-830I | Getting Started Guide - Page 5
Install Cartridge 1 3 Remove the toner cartridge from the bag. Keep the bag for future use. the pull tab as it is used to pull out the toner when the cartridge needs replaced. 5 Gently rock the toner cartridge 5 or 6 times to distribute toner evenly. Pull out the seal completely. Do not pull - Canon LC-830I | Getting Started Guide - Page 6
not force it to close. Open the cover and make sure the toner cartridge is properly set in the machine. The left edge (A) and the right side protrusions (B, C) of the toner cartridge should be aligned with the guides inside the machine. The Blue plastic pull tab should be pulled up as illustrated - Canon LC-830I | Getting Started Guide - Page 7
to get your fingers caught. For loading paper in the multi-purpose tray, see Chapter 2, "Document and Paper," in the Basic Operation Guide, Reference Guide > What This Machine Can Do > Loading Paper. Fan the paper stack and even the edges of the paper stack. 3 " ! # " Load the paper stack print - Canon LC-830I | Getting Started Guide - Page 8
Set Up the Paper Cassette to Fit the Paper Size 1 Incline the rear paper end guide until it is unlocked, then remove it from the paper cassette. 2 Attach the guide to the slots of the desired paper size. - Canon LC-830I | Getting Started Guide - Page 9
main power back on. 2 FAX The machine enters standby mode. ˔ is displayed: Make sure that the left cover is closed properly. (See "Install Cartridge" on p. 4.) ˔ is displayed: Make sure that the toner cartridge is installed properly - Canon LC-830I | Getting Started Guide - Page 10
(A) and the wall jack. Connect your external telephone to the external device jack (B) if required. If you want to use an external telephone and receive faxes, you will need to set up the receiving mode. (See "Set the Machine for Receiving Faxes," on p. 17.) - Canon LC-830I | Getting Started Guide - Page 11
holes, and attach the driver instruction label below. 3 Place the handset on the cradle. If using the handset or an external telephone, make sure to set the fax receive mode to or . For how to set the receive mode, see "Set the Machine for Receiving Faxes," on p.17. 6 Screw the - Canon LC-830I | Getting Started Guide - Page 12
letters and numbers. ˔ [ ] and [ ]: Move the cursor position. ˔ [Clear]: Deletes the character at the cursor position, or the entire entry if held for more than one second. [ ] [OK] [ [Additional Functions] ] Numeric Keys [Clear] [Stop] 11 - Canon LC-830I | Getting Started Guide - Page 13
/year) and time (in 24- hour format), then press [OK]. 5 Press [Stop] to return to standby mode. - You can select the date format among three types listed below at . menu to , see Chapter 1, "Before Using the Machine," in the Basic Operation Guide. 12 - Canon LC-830I | Getting Started Guide - Page 14
[Additional Functions]. 2 Use [ ] or [ ] to select , then press [OK]. 3 Use [ ] or [ ] to select , then press [OK]. 4 Use [ ] or [ ] to select , then press [OK]. 5 Use [ ] or [ ] to select , then press [OK]. 6 Use [ ] or [ ] to - Canon LC-830I | Getting Started Guide - Page 15
recipient. 06/30 2007 10:50 FAX (404)XXX-XXXX CANON SALES 0001/0001 Sender Information Date Time Fax Number Sender's Name (TTI) Page Number Before sending documents, you MUST register your fax number, user name, and the current date and time in the machine. Use the following keys to enter - Canon LC-830I | Getting Started Guide - Page 16
You can enter the following characters in each input mode: 15 - Canon LC-830I | Getting Started Guide - Page 17
send a document, the recipient's machine Canon r Company name and department: Canon-Accounting Dept. 1 Press [Additional Functions]. 2 Use [ ] or [ ] to select , then press [OK]. 3 Use [ ] or [ ] to select , then press [OK]. 4 Use [ ] or [ ] to select - Canon LC-830I | Getting Started Guide - Page 18
Additional Functions] → → → → then select . - Voice mail is not supported with . - The mode requires subscription to a DRPD (Distinctive Ring Pattern Detection) service. Contact your telephone company for availability - Canon LC-830I | Getting Started Guide - Page 19
4 Confirm that is displayed, then press [OK]. 5 Use [ ] or [ ] to select the receive mode, then press [OK]. For , make sure an answering machine is connected to the machine. 6 Press [Stop] to return to standby mode. For details, see the Reference Guide (in User Manual CD). 18 - Canon LC-830I | Getting Started Guide - Page 20
LAN connector. If the machine is connected to a network using a LAN cable, you can print the documents sent from a computer, send documents to a file server, i-fax and send document attached to an e-mail through a network. To use a network environment with the LASER CLASS 810, an optional network - Canon LC-830I | Getting Started Guide - Page 21
machine and computer. - To use a network environment with the LASER CLASS 810 the machine. The machine will draw an IP address automatically. - This machine also supports automatic to restart the machine. If you send documents via e-mail, specify the E-MAIL settings. (See Reference Guide > Network - Canon LC-830I | Getting Started Guide - Page 22
to print from any application software to the machine. Taking full advantage of your PC's processing power to compress the print data, this driver executes the high-speed data processing. - To use a printer driver and fax driver with the LASER CLASS 810, an optional network printer kit is required - Canon LC-830I | Getting Started Guide - Page 23
the screen shown at each step, click on the circled button to proceed. • The machine does not come with a USB cable. • For information on uninstallation, see Reference Guide > Troubleshooting > Uninstalling Software. System Requirements Microsoft Windows 98/98SE CPU: Intel 80486DX/66 MHz or faster - Canon LC-830I | Getting Started Guide - Page 24
UFR II Printer Driver, PCL Printer Driver, and Fax Driver all together. (The PCL Printer Driver is only available for the LASER CLASS 830i.) - If you want to install only the PCL driver, it is necessary to change the settings of the machine. See Reference Guide > Initial Settings > Setting - Canon LC-830I | Getting Started Guide - Page 25
(i.e., the machine side) of drivers you selected in step 3. ˔ Only the UFR II Printer Driver: proceed to step 35 ˔ UFR II Printer Driver and PCL Printer Driver: proceed to step 14 ˔ UFR II Printer Driver, PCL Printer Driver, and Fax Driver: proceed to step 14 ˔ UFR II Printer Driver and Fax Driver - Canon LC-830I | Getting Started Guide - Page 26
PCL5e] and/or [Canon LC800/L3000 PCL6]. The selected drivers are installed. 18 21 22 19 23 Select the USB port that was created when you installed the UFR II Printer Driver. 25 24 If you selected to install Fax Driver in step 3, proceed to step 25. If you did not select the Fax Driver in step - Canon LC-830I | Getting Started Guide - Page 27
27 30 34 28 29 Select the USB port that was created when you installed the UFR II Printer Driver. 31 35 36 32 33 37 You have now completed installation. 26 - Canon LC-830I | Getting Started Guide - Page 28
Installation Procedure for Network Connection 1 3 6 Connect the machine to the network correctly, and confirm that the power is on. 2 If the CD-ROM on the Windows desktop. Open the CD-ROM icon, then double- click [MInst] ([MInst.exe]). 4 8 Select the driver(s) you want to install. 5 27 - Canon LC-830I | Getting Started Guide - Page 29
9 12 16 [Process to Install Printer Driver] in this dialog box appears if drivers that can be installed with this Installer are already installed. 10 13 14 11 15 17 You have now completed installation. Repeat the steps from 6 if you have selected the two or three drivers in step 3. 28 - Canon LC-830I | Getting Started Guide - Page 30
if the drivers are installed successfully and that the machine is selected as the default printer. If your machine is selected in the [Printer] area when you open the [Print] dialog box from an application, your machine is set as the default printer. 1 Open the [Printers and Faxes] folder (Windows - Canon LC-830I | Getting Started Guide - Page 31
Bundled on the User Software CD The User Software CD is included with the LASER CLASS 830i and the optional network printer kit for the LASER CLASS 810. ˔ NetSpot Device Installer (NSDI) NetSpot Device Installer enables you to set up the machine for network operations. When you start this program, - Canon LC-830I | Getting Started Guide - Page 32
Using Help The User Software CD includes programs (driver software and application software) which the supplied instruction guides do not cover. When you utilize such programs, refer to online help following the instructions below. Online Help You can locate additional help in the online help file - Canon LC-830I | Getting Started Guide - Page 33
Center If you have a problem with your machine and you cannot solve it by referring to the manuals, please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at 1-800-828-4040 between the hours of 8:00 A.M. to 8:00 P.M. EST Monday through Friday and 10:00 A.M. to - Canon LC-830I | Getting Started Guide - Page 34
included on the CD-ROM via your computer screen. Follow the instructions below to use the User Manual CDROM (Reference Guide). System Requirements The User Manual CD-ROM (Reference Guide) can be used in the following system environments. ˔ Target Operating System Windows: 2000 SP4, XP, Vista - Canon LC-830I | Getting Started Guide - Page 35
the installation from your computer, or after selecting to display the Reference Guide from the CD-ROM in step 2. When using the Reference Guide with Macintosh, follow the steps below. 1. Insert the User Manual CD-ROM in your computer. 2. Drag-and-drop the [LC810_830i_Manual_us_eng] folder into - Canon LC-830I | Getting Started Guide - Page 36
the topic pages not related to functions, such as the maintenance and troubleshooting topics. I [Office Locations] Click to display Canon contact details in a separate window. - Select to create a shortcut for the Reference Guide on your desktop. - If the Windows CD-ROM autoplay feature is not - Canon LC-830I | Getting Started Guide - Page 37
Trademarks Canon, the Canon logo, LASER CLASS, and NetSpot are trademarks of Canon Inc. Microsoft, Windows and manual, or otherwise, without the prior written permission of Canon Inc. Disclaimers The information in this document is subject to change without notice. CANON INC. MAKES NO WARRANTY - Canon LC-830I | Getting Started Guide - Page 38
3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands CANON FRANCE S.A.S. 17, quai du Président Paul
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
Starter Guide