Canon LV-5100 Owners Manual - Page 11

CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR VIDEO INPUT JACKS (VIDEO/Y, Pb/Cb, Pr/Cr) Connect the composite video output from the video equipment to the VIDEO/Y jack or connect the component video outputs to the Y/VIDEO, Pb/Cb and Pr/Cr jacks. (Refer to P12.) RESET BUTTON This projector uses a micro processor to control the unit. Occasionally, the micro processor may malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively. AUDIO OUTPUT JACK (STEREO) Connect an external audio amplifier to this terminal. (Refer to P12, 13.) VIDEO S - VIDEO Y - Pb/Cb - Pr/Cr S-VIDEO INPUT JACK Connect the S-VIDEO output from the video equipment to this terminal. (Refer to P12.) RESET AUDIO OUT AV COMPUTER IN COMPUTER AUDIO IN CONTROL PORT AUDIO INPUT JACK Connect the audio output from the video equipment to this terminal. (Refer to P12.) COMPUTER AUDIO INPUT JACK Connect the audio output from the computer to this terminal. (Refer to P13.) COMPUTER INPUT TERMINAL Connect the computer output to this terminal. (Refer to P13.) CONTROL PORT CONNECTOR When controlling the computer with the Remote Control of this projector, connect the mouse port of your personal computer to this terminal. (Refer to P13.) COMPUTER INPUT TERMINAL Terminal : HDB15-PIN Connect the display output terminal of the computer to COMPUTER INPUT terminal of this projector with the VGA Cable (supplied). When connecting the Macintosh computer, the MAC Adapter (not supplied) is required. Pin Configuration 54 32 1 10 9 8 7 6 15 14 13 12 11 CONTROL PORT CONNECTOR Terminal : DIN 8-PIN Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with the Control Cable (the Control Cable for PS/2 port is supplied). Pin Configuration 876 5 43 21 1 Red Input 9 No Connect 2 Green Input 10 Ground (Vert.sync.) 3 Blue Input 11 Sense 0 4 Sense 2 12 Sense 1 5 Ground (Horiz.sync.) 13 Horiz. sync. 6 Ground (Red) 14 Vert. sync. 7 Ground (Green) 15 Reserved 8 Ground (Blue) PS/2 Serial 1 ----- R X D 2 CLK ----3 DATA ----4 GND GND 5 ----- RTS 6 ----- T X D 7 GND GND 8 ----- GND ADB ----ADB ----GND GND 11