Canon LV-5100 Owners Manual - Page 30

VIDEO MODE SELECTING COLOR SYSTEM 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT button. Another dialog box SYSTEM MENU will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to "Auto", and then press the SELECT button. When the Video signal is from the VIDEO or the S-VIDEO JACK Auto The projector automatically detects the incoming Video system, and adjusts itself to optimize its performance. When the Video System is PAL-M or PAL-N, select the system manually. This box indicates the system being selected. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce the proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Move the arrow to the Mode and press the SELECT button. When the Video signal is from the Y, Pb/Cb, Pr/Cr JACKS Auto The projector automatically detects the incoming Video signal, and adjusts itself to optimize its performance. This box indicates the system being selected. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce the proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i. Move the arrow to the Mode and press the SELECT button. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box SCREEN MENU will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the screen size that you want to set, and then press the SELECT button. Regular Normal Video Image size with 4 x 3 aspect ratio. Wide Resizes the image for wide screen size with 16 x 9 aspect ratio. Move the pointer to the function and press the SELECT button. Keystone When the image is distorted vertically, select Keystone in the dialog box. Correct the Keystone distortion by pressing KEYSTONE v/w button or POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 20. 30