Canon MF5770 imageCLASS MF5770 Set-Up Instructions for the Machine - Page 7
Set the receive mode - manual
UPC - 013803045048
View all Canon MF5770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Set the receive mode 1 Press [Menu]➊. 2 Press [ (-)] or [ (+)]➋ to select → press [Set] . 3 Press [ (-)] or [ (+)]➋ to select → press [Set] . 4 Press [ (-)] or [ (+)]➋ to select the receive mode → press [Set] . COPY Redial / Pause Coded Dial Alarm In Use / Memory Directory Status Monitor Clear Hook FAX SCAN Menu Start Stop/Reset Set You can select from the following: ● to automatically receive faxes, all calls will be answered as fax transmission. Voice calls will then be disconnected. ● to automatically switch between fax and voice calls. Faxes will be received automatically, and the machine will ring for voice calls. ● to receive faxes automatically and route voice calls to an answering machine connected to the machine. ● to distinguish between fax and voice calls by using Distinctive Ring Pattern Detection. ● for the connected telephone to ring for fax and voice calls. Fax calls must be answered manually. 5 Press [Stop/Reset] to return to the standby display. NOTE ● For details on setting fax receive mode, see Chapter 5, "Receiving Faxes," in the Facsimile Guide. ● Before using the machine, make sure you have set the correct telephone line type for your telephone line. For details on setting fax receive mode, see Chapter 2, "Registering Information in Your Machine," in the Facsimile Guide.