Canon MultiPASS F50 Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 31
Maintenance, Periodic Cleaning
View all Canon MultiPASS F50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 5 Maintenance Periodic Cleaning Your machine requires little periodic maintenance. This section describes the necessary cleaning procedures for your machine. Turn off the power and disconnect the power cord before cleaning the machine. When you are finished, reconnect the power cord and turn on the power again. • Be sure to turn off the power and disconnect the power cord before cleaning the machine. CAUTION • For the F50 model, print any documents stored in memory before disconnecting the power cord, since documents in memory are erased when the power is disconnected. (→ Fax Guide) • Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the components or generate static charges. Use a soft cloth to avoid scratching the components. • Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean the interior of the machine; these can damage the machine's components. Cleaning the Exterior Wipe the machine's exterior (shaded area) with a clean, soft, lint-free cloth moistened with water or diluted dishwashing detergent solution. 5 Maintenance (F50 model) (F30 model) Cleaning the Scanning Area Wipe the scanning area (shaded area) with a clean, soft, lint-free cloth moistened with water, then wipe with a clean, soft, dry, lint-free cloth. PLATEN GLASS TRANSPARENT SHEET (F50 model) PLATEN GLASS (F30 model) 5-1