Canon MultiPASS MP390 MultiPASS MP390 Set-Up Sheet - Page 5
Align the print head from the operation panel.
View all Canon MultiPASS MP390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Align the print head from the operation panel. Be sure to align the position of the print head to ensure print quality. 1 Print the print head position pattern. q This message appears. w Press [Set]. If this message does not appear after closing the scan unit, see page 118 of the User's Guide. e The machine prints a print head position pattern. 2 Enter checkmarks in the printed patterns. From column A to column K on the printout, place a checkmark by the pattern that shows the most solid box (least number of white stripes). Column A BAD SAMPLE Least solid box GOOD SAMPLE Most solid box 3 Align the print head. Using the operation panel, enter the value of the pattern you checked in step 2, then press [Set]. Columns (A to E) Press [+] to increase the number by one digit. Press [-] to decrease the number by one digit. Pattern numbers Columns (F to K) 4 Repeat step 3 for columns B through K. q Press [+] or [-] to select the pattern number of the good sample. w Press [Set]. You have completed installation and alignment. If you are connecting the machine to a computer for use, see , and for instructions on installing the software.