Canon PIXMA MP990 Getting Started - Page 11
Install the Ink Tanks - print head
View all Canon PIXMA MP990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Install the Ink Tanks 1 2 A 1 C B 2 Pull the orange tape (1) in the direction of the arrow to peel off the protective film and remove the film (2) completely. While pressing down with your left thumb, twist off the orange protective cap (A) located on the bottom of the ink tank. • Handle the ink tanks carefully. Do not drop or apply excessive pressure to them. • If the Scanning Unit (Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. In this case, close and reopen the Scanning Unit (Cover). • Be sure to use the supplied ink tanks. • Do not touch the electrical contacts (B) or open ink port (C) on the ink tank. The machine may not print properly if you touch them. • Do not push the sides of the ink tank; ink may splash. Hardware Setup