Canon PIXMA MX340 MX340 series Network Setup Troubleshooting - Page 10
Action - reset
View all Canon PIXMA MX340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6-B WPA/WPA2 Disable L M N 1 Enter the network key in Passphrase (L). • Enter upper and lower case letters of the alphabet correctly when the network key is between 8 and 63 characters. Letters are case sensitive. Letters are not case sensitive if the network key is 64 characters. 2 Select Dynamic Encryption Type (M), then click OK (N). • When WEP (Transitional Security Network) is selected in AirPort Utility, select AES(Secure Encryption). Go to . 7 The Manual Setup screen returns. Click Connect. • After that, follow the on-screen instructions to proceed with settings. Restoring the Machine's Default LAN Settings to Perform Setup Again Action Follow the procedure below to restore LAN settings of the machine to the default state. 1 Use the Menu button to select Device settings. 2 Use the [ or ] button to select LAN settings, then press the OK button. 3 Select Reset LAN settings, then press the OK button. 4 Select Yes, then press the OK button. 5 Make sure that the screen shown to the right appears. • After a while, the Device settings screen returns. Press the COPY button. The LAN setting of the machine is now restored to the default state. • Perform setup by following the procedures in "10 Set Up a Wireless Connection" on page 26 and onward in the printed manual: Getting Started. Wireless LAN SSID Data encryption TCP/IP setting Inactive BJNPSETUP Inactive Obtain an IP address automatically