Canon PIXMA iP2600 Quick Start Guide - Page 27
Maintenance, Cleaning, Power, Print Check Pattern, Start Print Head Cleaning. - ink cartridge
View all Canon PIXMA iP2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
4 Start Print Head Cleaning. (1) Click the Maintenance tab. (2) Click Cleaning. Print Head Cleaning starts when the Power lamp starts flashing green. Do not perform any other operations until Print Head Cleaning finishes. This takes about 60 seconds. (3) Load a sheet of A4 or Letter-sized plain paper in the Rear Tray. (4) Confirm the displayed message and click Print Check Pattern. The nozzle check pattern is printed. Do not perform any other operations until the nozzle check pattern finishes printing. Note The nozzle check pattern will not be printed correctly if there is not enough ink. Replace the FINE Cartridge if the remaining amount of ink is insufficient. See "Replacing a FINE Cartridge" on page 31. 5 Check the print head condition with the printed nozzle check pattern, and take appropriate action. See "Examining the Nozzle Check Pattern" on page 21. Note If the problem is not resolved after performing steps 4 and 5 twice, try Print Head Deep Cleaning. See "Print Head Deep Cleaning" on page 25. Routine Maintenance 23