Canon PIXMA iP2600 Quick Start Guide - Page 59
Message Appears on the Computer Screen, Service Error 5100 Is Displayed - usb cable
View all Canon PIXMA iP2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Message Appears on the Computer Screen Service Error 5100 Is Displayed Cause Movement of the FINE Cartridge Holder is blocked. Action Cancel printing from your computer, turn off the printer. Then clear the paper jam or foreign object that is preventing the FINE Cartridge Holder from moving. Important Be careful not to touch the components inside the printer. The printer may not print out properly if you touch it. Writing Error/Output Error/Communication Error Cause The printer is not ready. The printer is not connected properly. Printer port setting does not match the computer's interface connecting the printer. Printer driver is not installed properly. Action Confirm that the Power lamp is lit green. If the Power lamp is off, turn the printer on. While the Power lamp is flashing green, the printer is initializing. Wait until the Power lamp stops flashing and remains lit green. If the Alarm lamp is flashing orange, an error may have occurred in the printer. For details on how to resolve the error, see "Alarm Lamp Flashes Orange" on page 53. Make sure that the USB cable is securely plugged in to the printer and the computer. z If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. z There could also be a problem with the USB cable. Replace the USB cable and try printing again. Check the printer port settings. * In the following instruction, "XXX" signifies your printer's name. (1)Log on as a user account with administrator privilege. (2)Click Control Panel, then Printer under Hardware and Sound. In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes. In Windows 2000, click Control Panel then Printers. (3)Right-click the Canon XXX icon, then select Properties. (4)Click the Ports tab to confirm the port settings. Make sure that a port named USBnnn (where "n" is a number) with Canon XXX appearing in the Printer column is selected for Print to the following port(s). If the port setting is not correct, reinstall the Printer Drivers or change the port setting according to the interface you are using. The printer driver may not be installed properly. Uninstall them following the procedure described in the PC Printing Guide on-screen manual and reinstall them following the procedure described in your setup sheet. Troubleshooting 55