Canon PIXMA iP6000D iP6000D Quick Start Guide - Page 54

Printing the Nozzle Check Pattern

Get Canon PIXMA iP6000D PDF manuals and user guides View all Canon PIXMA iP6000D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Printing Maintenance (3) When the confirmation message is displayed, click OK. Print head cleaning starts when the POWER lamp starts blinking. Important Do not perform any other operations until the print head cleaning finishes. This takes about 30 to 40 seconds. (4) Read the message and click Print Check Pattern to print the nozzle check pattern. The nozzle check pattern is printed. Note Clicking Initial Check Items displays the items to be checked before cleaning. 4 Check the print head condition with the printed nozzle check condition. See "Printing the Nozzle Check Pattern" on page 44. Notes The nozzle check pattern will not be printed correctly if there is not enough ink. Replace the ink tank if the remaining amount of ink is insufficient. See "Replacing an Ink Tank" on page 37. If the problem remains after performing the print head cleaning three times, try the print head deep cleaning. See "Print Head Deep Cleaning" on page 53. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Printing Maintenance
52
(3)
When the confirmation message is displayed, click OK
OK
OK
OK.
Print head cleaning starts when the POWER
POWER
POWER
POWER lamp starts blinking.
(4)
Read the message and click Print Check Pattern
Print Check Pattern
Print Check Pattern
Print Check Pattern to print the nozzle check
pattern.
The nozzle check pattern is printed.
4
Check the print head condition with the printed nozzle check condition.
See “Printing the Nozzle Check Pattern
Printing the Nozzle Check Pattern
Printing the Nozzle Check Pattern
Printing the Nozzle Check Pattern” on page 44.
Important
Do not perform any other operations until the print head cleaning
finishes. This takes about 30 to 40 seconds.
Note
Clicking Initial Check Items
Initial Check Items
Initial Check Items
Initial Check Items displays the items to be checked before
cleaning.
Notes
±
The nozzle check pattern will not be printed correctly if there is not
enough ink. Replace the ink tank if the remaining amount of ink is
insufficient.
See “Replacing an Ink Tank
Replacing an Ink Tank
Replacing an Ink Tank
Replacing an Ink Tank” on page 37.
±
If the problem remains after performing the print head cleaning
three times, try the print head deep cleaning.
See “Print Head Deep Cleaning
Print Head Deep Cleaning
Print Head Deep Cleaning
Print Head Deep Cleaning” on page 53.