Canon PowerShot ELPH 180 IS User Manual - Page 50
Configure the setting., Check the focus.
View all Canon PowerShot ELPH 180 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
• Focusing may not be possible in some shooting conditions. • In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway. In this case, the focus and exposure are set according to the specified AF frame mode. • If optimum exposure cannot be obtained, the shutter speed and aperture value are displayed in orange. Release the shutter button, and then press it halfway again. • [AF-Point Zoom] on the [ ] tab (=21) is not available. • Not available when using the self-timer (=30). Magnifying the Area in Focus Still Images You can check the focus by pressing the shutter button halfway, which will enlarge the portion of the image in focus in the AF frame. 1 Configure the setting. zzPress the [ ] button, choose [AF- Point Zoom] on the [ ] tab, and then choose [On] (=21). 2 Check the focus. zzIn [Face AiAF] AF mode, the face detected as the main subject is magnified when the shutter button is pressed halfway. In [Center] AF mode, the AF frame in the center is magnified. • The area in focus is not magnified in the following cases when the shutter button is pressed halfway. - [Face AiAF]: When a face was not detected, or when the person is too close to the camera and their face is too large for the screen - [Center]: When the camera cannot focus on the subject - [Tracking AF]: Not magnified in this mode - When digital zoom is used (=28) Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 50