Canon PowerShot ELPH 180 IS User Manual - Page 80
Connecting to Listed Access Points, View the listed access points., Choose an access point., Display
View all Canon PowerShot ELPH 180 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
zzDouble-click the connected camera icon. zzDriver installation will begin. zzAfter driver installation is complete, and the camera and computer connection is enabled, the AutoPlay screen will be displayed. Nothing will be displayed on the camera screen. 10 Display CameraWindow. zzWindows: Access CameraWindow by clicking [Downloads Images From Canon Camera]. zzMac OS: CameraWindow is automatically displayed when a Wi-Fi connection is established between the camera and computer. 11 Import images. zzClick [Import Images from Camera], and then click [Import Untransferred Images]. zzImages are now saved to the Pictures folder on the computer, in separate folders named by date. zzClick [OK] in the screen that is displayed after image import is complete. zzTo view images you save to a computer, use preinstalled or commonly available software compatible with images captured by the camera. • Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu. You can easily connect again by pressing the [ ][ ] buttons to choose the device and then pressing the [ ] button. To add a new device, display the device selection screen by pressing the [ ][ ] buttons, and then configure the setting. • If you prefer not to display recent target devices, choose MENU (=21) ► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► [Target History] ► [Off]. • You can also change the camera nickname on the screen in step 2 (=78). • When the camera is connected to a computer, the camera screen is blank. • Mac OS: If CameraWindow is not displayed, click the [CameraWindow] icon in the Dock. • To disconnect from the camera, turn off the camera. • If you chose [PIN Method] in step 6, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the [Select a Device] screen. For further details, refer to the user manual included with your access point. Connecting to Listed Access Points 1 View the listed access points. zzView the listed networks (access points) as described in steps 1 - 4 of "Using WPS-Compatible Access Points" (= 78). 2 Choose an access point. zzPress the [ ][ ] buttons to choose a network (access point), and then press the [ ] button. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 80