Canon PowerShot N Black Camera User Guide - Page 87

XXAfter a connection is established with the smartphone, the smartphone name is displayed on the camera. (This screen will close in about one minute.) 7 Import images. zzUse the smartphone to import images from the camera to the smartphone. zzUse the smartphone to end the connection; the camera will automatically turn off. • When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 3. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 4 - 6 in "Adding a Computer" (=95). • To control the camera manually, either end the connection from the smartphone or restart the camera after pressing the power button to turn it off momentarily. • Once a connection has been established with a smartphone, you can automatically reconnect to the registered device by simply pressing the < > button, even if the camera has been turned off. • The image quality level for movies that can be sent may differ depending on the smartphone. Refer to the instruction manual provided with your smartphone for details. • To remove a registered smartphone, touch [H] and then [n], and on the [3] tab, choose [Mobile Device Connect Button]. After the confirmation message, touch [OK]. • If the date and time have not been set, the [Date/Time] screen will be displayed in step 2. Set them following the steps in "Setting the Date and Time" (=13). Adding Other Smartphones Only one smartphone can be assigned to the < > button. • To assign a different one, clear the current assignment. Touch [H] and then [n], and on the [3] tab, choose [Mobile Device Connect Button]. After the confirmation message, touch [OK], and then assign the new smartphone to the button. • When registering multiple smartphones, add them to your list of devices to connect to in the Wi-Fi menu (=87). Adding a Smartphone Using the Wi-Fi Menu You can also add a smartphone by touching [ ] in Playback mode and then touching [ ], which is displayed in the Wi-Fi menu. The procedure for adding a smartphone through the Wi-Fi menu varies from the < > button approach as follows: • The connection is established through the Wi-Fi menu (=88). You cannot connect to a smartphone by pressing the < > button. • The camera will remain on, even after you have disconnected from the smartphone. • You can operate the camera to send images to the smartphone. • Multiple smartphones can be added. • After selecting a smartphone in step 6 of "Establishing the Smartphone Connection" (=86), the privacy settings screen (where you decide whether to allow images on the camera to be displayed on the smartphone) is displayed. If you select [No], images on the camera will not be displayed on the smartphone. • To change privacy settings for registered smartphones, choose the smartphone in [Edit a Device] (=102), and then choose [View Settings]. • When a connection destination is set using the Touch Actions setting (=76), you can automatically access the function to connect to the last connected destination from the next time by just dragging on the screen without needing to perform the connection operation. Cover Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide 1 Camera Basics 2 Creative Shot Mode 3 Auto Mode/ Hybrid Auto Mode 4 Other Shooting Modes 5 P Mode 6 Playback Mode 7 Wi-Fi Functions 8 Setting Menu 9 Accessories 10 Appendix Index 87