Canon PowerShot SX540 HS User Manual - Page 83

●● After you set the shutter speed or aperture value, the exposure level may change if you adjust the zoom or recompose the shot. ●● Screen brightness may change depending on your specified shutter speed or aperture value. However, screen brightness remains the same when the flash is up and the mode is set to [ ]. ●● To have the setting you did not configure in step 2 (whether shutter speed or aperture value) automatically adjusted to obtain standard exposure, hold the shutter button halfway, and then press the [ ] button (Note that standard exposure may not be possible with some settings.). ●● With shutter speeds of 1.3 seconds or slower, ISO speed is [ ] and cannot be changed. ●● [ ]: Manual ●● Calculation of standard exposure is based on the specified metering method (=69). Adjusting the Flash Output Still Images Choose from the three flash levels in [ ] mode. Movies 1 Enter [ ] mode. ●●Set the mode dial to [ ]. 2 Configure the setting. ●●Raise the flash, press the [ ] button and immediately turn the [ ] dial to choose the flash level, and then press the [ ] button. ●●Once the setting is complete, the flash output level is displayed. [ ]: Minimum, [ ]: Medium, [ ]: Maximum ●● You can also set the flash level by accessing MENU (=29) and choosing [ ] tab > [Flash Settings] > [Flash Output]. ●● You can set the flash level in [ ] or [ ] mode by accessing MENU (=29) and choosing [ ] tab > [Flash Settings] > [Flash Mode] > [Manual]. ●● You can also access the [Flash Settings] MENU screen (=29) when the flash is up by pressing the [ ] button and immediately pressing the [ ] button. Before Use Basic Guide Advanced Guide 1 Camera Basics 2 Auto Mode / Hybrid Auto Mode 3 Other Shooting Modes 4 P Mode 5 Tv, Av, and M Mode 6 Playback Mode 7 Wi-Fi Functions 8 Setting Menu 9 Accessories 10 Appendix Index 83