Canon PowerShot SX730 HS User Manual - Page 154

3 Charge the battery pack. ●●CA-DC30: Flip out the plug (1) and plug the compact power adapter into a power outlet (2). ●●CA-DC30E: Plug the power cord into the compact power adapter, then plug the other end into a power outlet. ●●Charging begins and the USB charge lamp lights up. ●●The lamp turns off when charging finishes. ●●Remove the compact power adapter from the power outlet and the interface cable from the camera. ●● To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours. ●● When charging another battery pack, always disconnect the interface cable from the camera before replacing the battery pack for charging. ●● For details on charging time and the number of shots and recording time possible with a fully charged battery pack, see "Power" (= 183). ●● You can view images even while the battery is charging, by turning the camera on and entering Playback mode (=23). However, you cannot shoot while the battery is charging. ●● If the USB charge lamp is not lit, reconnect the interface cable. ●● Charged battery packs gradually lose their charge, even when they are not used. Charge the battery pack on (or immediately before) the day of use. ●● The charger can be used in areas with 100 - 240 V AC power (50/60 Hz). For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery pack. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, and M Mode Playback Mode Wireless Features Setting Menu Accessories Appendix Index 154