Canon PowerShot SX730 HS User Manual - Page 86

●● After you set the shutter speed and aperture value, the exposure level may change if you adjust the zoom or recompose the shot. ●● Screen brightness may change depending on your specified shutter speed and aperture value. However, screen brightness remains the same when the flash is up and the mode is set to [ ]. ●● To have the setting that is not chosen in step 2 (whether shutter speed or aperture value) automatically adjusted to obtain optimum exposure, hold the shutter button halfway and press the [ ] button. Note that optimum exposure may not be possible with some settings. ●● With shutter speeds of 1.3 seconds or slower, ISO speed is [80] and cannot be changed. ●● [ ] Auto mode is not available in [ ] mode. ●● [ ]: Manual ●● Calculation of optimum exposure is based on the specified metering method (=71). Adjusting the Flash Output Still Images Choose from the three flash levels in [ ] mode. Movies 1 Enter [ ] mode. ●●Set the mode dial to [ ]. 2 Configure the setting. ●●Press the [ ] button, choose [ ] in the menu, and adjust the setting by either pressing the [ ][ ] buttons or turning the [ ] dial (=28). ●●Once the setting is complete, the flash output level is displayed. [ ]: Minimum, [ ]: Medium, [ ]: Maximum ●● You can also set the flash level by accessing MENU (=29) and choosing [ ] tab > [Flash settings] > [Flash Output]. ●● You can also set the flash level in [ ] or [ ] mode by accessing MENU (=29) and choosing [ ] tab > [Flash settings] > [Flash Mode] > [Manual]. ●● You can also access the [Flash settings] MENU screen (=29) when the flash is up by pressing the [ ] button and immediately pressing the [ ] button. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, and M Mode Playback Mode Wireless Features Setting Menu Accessories Appendix Index 86