Canon S80 PowerShot S80 Camera User Guide Advanced - Page 117

Registering Sounds for Start-Up, Operations, Self-Timer and the Shutter Use the or button to select (Record) and press the FUNC./SET button. z You can select it by turning the multi control dial. z Recording will start and automatically stop when the time is exceeded. Recording times for each item are as follows: Start-up Sound: 1 sec. Self-timer Sound: 2 sec. Operation Sound: 0.3 sec. Shutter Sound: 0.3 sec. z Use the or button to select (Register) and press the FUNC./ SET button. 8 5 Use the or button to select [OK] and press the FUNC./SET button. z You can select it by turning the multi control dial. Customizing the Camera (My Camera Settings) z Movies and sounds recorded using the Sound Memo function (p. 97) cannot be registered as My Camera settings. z The prior setting is erased when a new My Camera setting is added. A computer is required to restore the My Camera Settings to the defaults. Use the supplied software (ZoomBrowser EX/ImageBrowser) to add the default settings to the camera. Data that can be Registered as My Camera Settings My Camera settings should conform to the data types below. Memory card images shot with this camera in any of the following formats can be registered: z Start-up Image - Compression Method: JPEG (Baseline JPEG) - Sampling Rate: 4:2:0 or 4:2:2 - Dimensions: (320 x 240 pixels) z Start-up, Operation, Self-timer and Shutter Sounds - Compression Method: WAVE (monaural) - Quantization Bits: 8 bit - Sampling Frequency: 11.025 kHz or 8.000 kHz 115