Canon SELPHY CP910 User Guide - Page 24
Choosing the Finish Print Finish, Printing with a Border around Images, Borders
View all Canon SELPHY CP910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Choosing the Finish (Print Finish) Example of finish [Glossy] [Pattern 1] [Pattern 2] zzBy adding a subtle texture to the surface of prints, you can create a less glossy finish. Glossy (default) Prints with a glossy surface finish. Pattern 1 Applies a slightly rough surface pattern, for a less glossy finish. Pattern 2 Applies a fine surface pattern, for a less glossy finish. • The surface finish may be less noticeable depending on the printer's internal temperature when you turn it on. Before turning on the printer and printing, wait until it has adjusted to an ambient temperature of 10 - 35 °C (50 - 95 °F). • Turning off SELPHY will restore the default setting of [Glossy]. • You can have SELPHY retain configured settings even after being turned off. With SELPHY off, hold down the buttons, and then hold down the button until "SELPHY" is displayed. If you prefer SELPHY not to retain configured settings, repeat this procedure after turning SELPHY off. This procedure also determines whether SELPHY retains [Page Layout] (=25) settings when turned off. Printing with a Border around Images (Borders) Cover Contents zzPrint images with or without a border. zz Borderless (default) / Bordered • Turning off SELPHY will restore the default setting of [ Borderless]. • Images are printed without borders when [Page Layout] (=25) is set to [ Index] or [ Shuffle]. • On card-size paper (=2), images are printed without borders when [Page Layout] (=25) is set to [ 8-up] even if [ Bordered] is selected. Part Names Basic Operations Print Settings Printing via Wi-Fi Printing via USB Cable Troubleshooting Appendix 24