Canon VIXIA HF G40 User Manual - Page 104
Using the HDMI OUT Terminal, Open the [HDMI Output] screen., Touch the desired option and then touch - hd camcorder
View all Canon VIXIA HF G40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Connecting to an External Monitor 104 Using the HDMI OUT Terminal The HDMITM OUT terminal also offers a digital connection and outputs both a video and audio signal. If you selected [k Automatic], the output signal will automatically switch to HD or SD depending on the capability of the external monitor. In mode, the HDMI OUT terminal outputs two-channel linear PCM audio with a sampling frequency of 48 kHz. 1 Open the [HDMI Output] screen. [FUNC.] > [MENU] > q > [HDMI Output] • Touching [FUNC.] is necessary only when performing the procedure in mode. 2 Touch the desired option and then touch [X]. NOTES • The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMI output terminal on an external device, as this may damage the camcorder. • There will be no video output from the AV OUT terminal while an external monitor is connected to the HDMI OUT terminal. • Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors. • Video may not be output correctly depending on the monitor. In such case, use another terminal. • If you selected an option other than [k Automatic] and the connected monitor is not compatible with the signal output from the camcorder, then HDMI output will stop. • By default, onscreen displays will be embedded in the output video signal. You can change this using the q > [Output Onscreen Displays] setting. Using the AV OUT Terminal The AV OUT terminal outputs a down-converted analog video signal and audio signal for connection to monitors with a composite audio/video input. NOTES • When you play back a scene on a monitor with a 4:3 aspect ratio, the monitor will switch automatically to widescreen mode if it is compatible with the Video ID-1 system. • If you are connecting the camcorder to a standard definition monitor without widescreen mode, make sure to change the s > [TV Type] setting.