Canon VIXIA HF G40 User Manual - Page 33
Initializing a Memory Card, To remove the memory card
View all Canon VIXIA HF G40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
1 Turn off the camcorder. • Make sure the POWER/CHG indicator is off. 2 Open the double memory card slot cover. 3 Insert the memory card straight, with the label facing the front of the camcorder, all the way into one of the memory card slots until it clicks. • You can also use two memory cards, one in each memory card slot. 4 Close the double memory card slot cover. • Do not force the cover closed if the memory card is not correctly inserted. Using a Memory Card 33 To remove the memory card Push the memory card once to release it. When the memory card springs out, pull it all the way out. IMPORTANT • Observe the following precautions while the ACCESS indicator is flashing. Failure to do so may result in permanent data loss. - Do not disconnect the power source or turn off the camcorder. - Do not remove the memory card. • Turn off the camcorder before inserting or removing a memory card. Inserting or removing the memory card with the camcorder on may result in permanent data loss. • Memory cards have front and back sides that are not interchangeable. Inserting a memory card facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the memory card as described in step 3. Initializing a Memory Card Initialize memory cards when you use them with this camcorder for the first time. You can also initialize a memory card to permanently delete all the recordings it contains. Operating modes: 1 Power the camcorder using the compact power adapter. • Do not disconnect the power source or turn off the camcorder until the initialization is completed. 2 Open the initialization screen for the desired memory card. [FUNC.] > [MENU] > [Initialize] > [Initialize ] > [6 Mem. Card A] or [7 Mem. Card B] > • Touching [FUNC.] is necessary only when performing the procedure in mode. • In the initialization screen, touch [Complete Initialization] to physically erase all the data rather than just clear the file allocation table of the memory card.