Canon Wireless Transmitter WFT-E5A WFT-E5 Instruction Manual - Page 104
What to check on the transmitter
View all Canon Wireless Transmitter WFT-E5A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Responding to Error Messages 25: Another terminal has set the same IP address Is another device on the transmitter network using the same IP address as the transmitter? X This error occurs if the transmitter is connected to a network where another device subsequently connects with the same IP address. Change the transmitter's IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address. 26: No response from DHCP server What to check on the transmitter On the transmitter, the network setting is [Auto setting]. Does the error occur under this setting? X If no DHCP server is used, set the transmitter's network setting to [Manual setting]. (p.29) What to check on the DHCP server Is the DHCP server on? X Turn the DHCP server on. Are the DHCP server settings for IP addresses and the corresponding names correct? X On the DHCP server, make sure IP addresses and the corresponding names are entered correctly. Is the DHCP server working correctly? X Check the DHCP server settings to make sure it is working correctly as a DHCP server. X If applicable, ask your network administrator to ensure the DHCP server is available. What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? X If applicable, ask your network administrator for the network gateway address and enter it on the transmitter. (p.29) X Make sure the gateway address setting is correctly entered on all network devices, including the transmitter. 104