Canon Wireless Transmitter WFT-E5A WFT-E5 Instruction Manual - Page 96
Select [OK]., Establish a wireless connection between, the GPS device and Bluetooth unit.
View all Canon Wireless Transmitter WFT-E5A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Connecting GPS Devices via Bluetooth 5 Select [OK]. After the Bluetooth unit is attached to the transmitter, the transmitter's lamp blinks in green and a message is displayed indicating that a connection has been established. When the confirmation message is displayed, select [OK]. X At this point, the menu option [Disconnect] becomes available. Select this option before detaching the GPS device. 6 Establish a wireless connection between the GPS device and Bluetooth unit. 7 Turn on the GPS device and activate Bluetooth® on it. Select [Bluetooth device connection]. X Nearby Bluetooth® devices in use are listed. (Only GPS devices can be connected.) Select the GPS device. Press to display the connection status of Bluetooth® devices. Pressing when the status is [Not conn.] will list nearby Bluetooth® devices in use. Turn the dial to select [GPS] , and then press . Select [OK] and press . If a Bluetooth® password has been set on the GPS device, a password input screen is displayed. Enter the password. X The transmitter now starts to establish a connection with the GPS device. It may take a few minutes to establish a connection with the GPS device. Camera operations such as shooting, menu display, or image playback are not possible until the connection is established. 96