Canon iPF605 iPF605 User Manual - Page 554

Messages regarding paper Insufcient paper for job Cause The printer has received a print job longer than the amount of roll paper left. Corrective Action Follow the steps below to replace the roll. 1.Remove the roll. (→P.117) (→P.118) (→P.119) 2.Load a roll with enough paper left. (→P.112) (→P.114) (→P.115) 3.If no barcode was printed on the roll, specify the paper type. (→P.110) 4.Select the paper length, unless a barcode was printed on the roll and you have deactivated automatic detection of the remaining roll paper. (→P.111) Hold down the Stop button for a second or more to cancel printing. Press the Online button to resume printing. However, the roll paper may run out during the print job and you may not be able to print all of the document. This paper cannot be used. Check supported paper sizes. Cause Corrective Action Paper that is too large for the printer has been loaded. Load paper of the correct size. (→P.106) Paper that is too small for the printer has been loaded. Load paper of the correct size. (→P.106) Roll printing is selected. Cause You have attempted to print a test print sheet or other printer status information on a roll, but no roll is loaded. Corrective Action Load a roll and try printing again. To print on a sheet instead, hold the Stop button for more than a second to cancel printing, load a sheet, and then print. (→P.90) 540 Error Message