Canon iPF605 iPF605 User Manual - Page 562

Messages regarding printing or adjusment Messages regarding printing or adjusment Use another paper. Cause The Printhead and feed amount cannot be adjusted when highly transparent lm is loaded. Corrective Action For automatic Printhead adjustment, we recommend using a type of paper that you often use, other than lm. (→P.453) Adjust the feed amount manually. (→P.461) Cannot print as specied. Press Load/Eject and replace paper with A4/LTR (vertical) or larger Cause Corrective Action Paper has been loaded that is too small to Press the Load/Eject button and switch to paper A4/Letter, print the test pattern for printhead adjustment vertical, or larger. or nozzle checking. Press Load/Eject and replace roll with 10 in. wide or larger roll. Cause Corrective Action Paper has been loaded that is too small to Press the Load/Eject button and load a roll at least 10 print the test pattern for printhead adjustment inches (254 mm) wide. or nozzle checking. Cannot adjust band. Cause The Printhead nozzles are clogged. Corrective Action Follow the steps below to check the nozzles. 1.Print a test pattern to check the nozzles. (→P.479) 2.Clean the Printhead if the nozzles are clogged. (→P.480) Highly transparent lm is loaded that cannot be used Adjust the feed amount manually. for feed amount adjustment. (→P.461) Cannot adjust printhead. Cause The Printhead nozzles are clogged. Corrective Action Follow the steps below to check the nozzles. 1.Print a test pattern to check the nozzles. (→P.479) 2.Clean the Printhead if the nozzles are clogged. (→P.480) Highly transparent lm is loaded that cannot be used We recommend using a type of paper that you often for Printhead adjustment. use, other than lm, for Printhead adjustment. (→P.453) 548 Error Message