Canon iX7000 Network Setup Troubleshooting - Page 4

The Printer is Not Detected after the Network Environment is Changed Check Wait until the IP address is assigned to the computer. You may need to restart your computer. • Search for the printer again after confirming a valid IP address is assigned to the computer. Glossary • IP address A numerical identification assigned to each computer or network device connected to a network.  Message is Displayed during Software Installation The Set Printer IP Address Screen is Displayed Check A A Check 1 Make sure that you follow "Connection Checklist" on page 5, then click Connect (A). Check 2 Unplug the network device (router, etc.) from the power outlet and plug it in, then click Connect (A). Check 3 When obtaining an IP address automatically, make sure that the DHCP function of the network device (router, etc.) is active. • For details on how to check settings of the network device, refer to the manual supplied with the network device or contact its manufacturer. Activate the DHCP function of the network device, then click Connect (A). • For details on how to change settings of the network device, refer to the manual supplied with the network device or contact its manufacturer. Check 4 If the problem is not solved even after following Check 1 to 3, specify the IP address of the printer. • For details on how to specify the IP address, refer to "Specifying the Printer's IP Address" on page 3. Glossary • DHCP function A function that automatically assigns required information (IP address, etc.) to computers connected to the Internet. • IP address A numerical identification assigned to each computer or network device connected to a network.