Canon iX7000 Network Setup Troubleshooting - Page 5
Other Troubleshooting Tips - driver
UPC - 013803103014
View all Canon iX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
The New port could not be created is Displayed Action Uninstall the drivers, then setup the printer again. • For the setup procedure, follow the procedures in "Wired LAN Connection" (P.23) and onward in the printed manual: Getting Started. Other Troubleshooting Tips Specifying the Printer's IP Address Action Assign an IP address and other values to the printer manually if, for example, there is no DHCP function in the environment where the printer is used. A A B B C C 1 Select Use next IP address (A). 2 Enter the value you want to specify for each of IP Address, Subnet Mask and Default Gateway (B), then click Connect (C). 1 Select Use following IP address in TCP/IP Setting (A). 2 Enter the value you want to specify for each of IP Address, Subnet Mask and Router (B), then click Connect (C). Glossary • DHCP function A function that automatically assigns required information (IP address, etc.) to computers connected to the Internet. • IP address A numerical identification assigned to each computer or network device connected to a network. • Subnet mask A number used to distinguish the network and host portions of an IP address. • Default gateway A device required to connect to external networks. • The printer cannot be used on external networks such as the Internet.