Canon imagePROGRAF TA-30 series User Manual - Page 358
Head replacement
View all Canon imagePROGRAF TA-30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
The Maintenance screen appears. 2. Tap Head replacement. A confirmation message appears. 3. Tap Yes. Ink begins being drawn in. When it finishes, instructions for the print head replacement procedure appear on the touch screen. It takes about 1 to 2 minutes for ink to be drawn into the system and remove ink from the print head. 4. Open top cover. 5. If the print head locking cover and print head lock lever are dirty, use a damp cloth that you have wrung out completely to wipe them clean. Important • Do not touch the linear scale (A) or carriage shaft (B). Touching these may cause malfunction. 358
The
Maintenance
screen appears.
2.
Tap
Head replacement
.
A confirmation message appears.
3.
Tap
Yes
.
Ink begins being drawn in. When it finishes, instructions for the print head replacement procedure
appear on the touch screen.
It takes about 1 to 2 minutes for ink to be drawn into the system and remove ink from the print head.
4.
Open top cover.
5.
If the print head locking cover and print head lock lever are dirty, use a damp cloth that
you have wrung out completely to wipe them clean.
Important
•
Do not touch the linear scale (A) or carriage shaft (B). Touching these may cause malfunction.
358