Canon imagePROGRAF TA-30 series User Manual - Page 58

Loading Rolls in the Printer Follow these steps to load rolls in the printer. Important • Before loading a roll, confirm whether the inside of the top cover or the output guide is soiled. If these areas are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.") Watch the movie 1. Tap Load paper or Replace paper on the Home screen of the operation panel. Note • If the Home screen does not appear, tap the HOME button. 2. Tap Load roll paper. Note • If any paper has been advanced that will not be used, a message is shown requesting you to remove it. After following the instructions on the screen to remove the paper, go to the next step. 3. Holding the roll holder flange (A), rest the roll holder shaft on the roll holder resting ledge (B). At this time, position the holder as shown in the illustration so that the R label (C) on the roll holder flange is aligned with the R label (D) on the printer. 58