Canon imagePROGRAF iPF6300S iPF6300S Setup Guide - Page 12

7 Insert the edge of the paper into the paper feed slot (a) and feed it until you hear the paper start to feed. The paper starts feeding. 8 The screen for selecting the paper type is shown on the display screen. Press ▲ or ▼ to select the type of paper loaded in the printer. Select Coated Paper and press OK. Then from the menu that appears, select HW Coated and press OK. a Close the roll feed unit cover. The printhead position adjustment starts automatically. Adjusting the position of the printhead takes about 16 minutes. When the printhead adjustment is finished, Ready appears on the display screen. Printer setup is now complete. • To enhance printing quality when printing fine lines/text or photos at high precision, see "Enhancing Printing Quality" in the User's Guide. • After you have finished setting up the printer and installing the software and electronic manuals, we recommend performing color calibration. Color MEMO calibration compensates for changes in color from individual variation and aged deterioration of the printer, ensuring better color consistency. Perform color calibration using the provided Sample Paper, which is compatible with this process. For information on other compatible paper, refer to the Paper Reference Guide. During color calibration, on the control panel's display screen, open (settings/adj. tab) and select Adjust Printer - Calibration - Auto Adjust. The process of color calibration takes about 13 minutes. • If you use the color calibration for color adjustment, it is useful to set the function to notify the execution period (Prompt Execution). For details of the function, refer to "Using Color Calibration for Color Adjustment" in User's Guide. • When the setup is completed, refer to the various manuals to use the printer. Refer to "The Manuals Supplied with This Printer" on page 1. Responding to Messages Error messages may appear on the display screen of the control panel during printer installation. If so, it may not indicate a problem with the printer, and the issue may be easily resolved. Common messages and the causes are listed here with corrective actions. To respond to error messages other than these, refer to the Basic Guide (2). For details of operation procedure, refer to User's Guide installed in "Install the Software and the Electronic Manuals". Message Paper loaded crooked. No maintenance cartridge installed. Roll paper is not securely in contact with roll holder. Hardware error. xxxxxxxx-xxxx (x represents a letter or number) Cause The loaded paper is crooked. The maintenance cartridge is not connected. The roll of paper was not firmly pushed against the roll holder when the paper was loaded. The belt stopper or the tape inside the top cover has not been removed. You may have encountered an error that cannot be resolved. ERROR Exxx-xxxx (x represents a letter or number) You may have encountered an error that cannot be resolved. Corrective Action Adjust the paper. (see steps 7-8 on page 12) Install the maintenance cartridge correctly. Reload the roll of paper. (see steps 2-7 on page 11-12) Turn off the power, open the top cover, and remove the tape and the belt stopper, then turn the power on. Turn off the printer and wait at least three seconds before restoring the power. If the message appears again, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. Write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. 12