Canon imagePROGRAF iPF810 iPF810 User Manual - Page 680

Messages regarding paper Sheet removed. Cause A sheet has come out of the printer during printing. Corrective Action 1.Lift the Release Lever and remove the paper. 2.If Not nished printing. Finish printing remaining jobs? is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. Sheet printing is selected. Cause Corrective Action You have attempted to print a test print sheet or other Load a sheet and try printing again. printer status information on a sheet, but no sheet is loaded. To print on a roll instead, hold down the Stop button for more than a second to cancel printing, load a roll, and then print. (→P.108) Regular printing is selected, but a roll is loaded. Cause A print job for printing on sheets was sent when a roll is loaded. Corrective Action Hold down the Stop button for a second or more to cancel printing. Remove the roll and load a sheet of the type and size of paper you have specied in the printer driver. (→P.143) (→P.112) You are using a roll with the Media Take-up Unit, but a print job requiring sheets was sent. 1.Press the Stop button for a second to cancel the job involving sheets. 2.Choose Paper Cutting in the menu. 3.Press the Load/Eject button and remove the roll. 4.Load a sheet and resend the print job. Paper jam. Lift the release lever. Cause A paper jam occurred in the printer during printing. Corrective Action 1.Lift the Release Lever and remove the jammed paper. (→P.147) (→P.170) 2.If Not nished printing. Finish printing remaining jobs? is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. 666 Error Message