Casio KL-820 User Guide - Page 35

• Tape Cutting Cannot cut tape. Possible Causes Tape cutter blade is dull. Action Take the label printer to the dealer from whom you purchased it to have the tape cutter blade replaced. Page - Printed text is cut off by tape cut operation. Possible Causes Out of tape Action Replace the tape cartridge with a new one. Page E-10 • Using Labels Label will not adhere to a surface. Possible Causes The backing paper is still on the back of the tape. Action Peel the backing paper from the back of the tape to expose the adhesive. Surface is unsuitable for affixing a tape. Labels do not adhere well to surfaces that are rough, wet, oily, or dirty. Page E-22 E-22 Error Messages/Display Messages Message Possible Causes Action TOO MANY LINES! • The number carriage returns you input causes the label to exceed the maximum number of lines for the tape you are using. • Use wider tape or reduce the number of lines. 6mm tape...1 line 9mm tape...1 line 12mm tape...Up to 2 lines 18mm tape...Up to 3 lines 24mm tape...Up to 3 lines • Use wider tape or reduce the number of lines with frame. 6mm tape...1 line 9mm tape...1 line 12mm tape...1 line 18mm tape...Up to 2 lines 24mm tape...Up to 2 lines NO DATA! • You are attempting to recall text from memory when there is none stored. • Store the text in memory and then try again. LOAD A TAPE CARTRIDGE • You are attempting to perform printing without setting a tape cartridge. • Turn the power OFF and set the tape cartridge. LOW BATTERY! • Battery power is low. • Replace the batteries. LABEL LONGER THAN SETTING! SET/ESC • This message appears when the length of the tape that will actually be printed is longer than the specified tape length. • To print, press SET. • To cancel printing, press ESC. You can then decrease the number of characters, change to a longer tape setting, or select auto tape length. E-34