Cisco 1252G Hardware Installation Guide - Page 69
Obtaining the Access Point Image File
UPC - 882658140631
View all Cisco 1252G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 3 Troubleshooting 1240AG Series Autonomous Access Points Obtaining the Access Point Image File Obtaining the Access Point Image File The access point image file can be obtained from the Cisco.com software center using these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Step 11 Step 12 Step 13 Step 14 Step 15 Step 16 Step 17 Use your Internet browser to access the Cisco Software Center at the following URL: http://www.cisco.com/cisco/software/navigator.html Click Wireless LAN Access > Aironet Access Points > Cisco Aironet 1240 AG Series. Click Cisco Aironet 1240AG Access Point. On the Enter Network Password window, enter your Cisco.com username and password and click OK. Click IOS. Choose the Cisco IOS release desired, such as 12.3.8.JA. Click WIRELESS LAN for your access point image file, such as c1240-k9w7-tar.123-8.JA.tar. On the Enter Network Password window, enter your Cisco.com username and password and click OK. On the Security Information window, click Yes to display non-secure items. On the Encryption Software Export Authorization page, read the information and check Yes or No to the question asking if the image is for use my you or your organization. Click Submit.. If you checked No, enter the requested information and click Submit. Click Yes to continue. Click DOWNLOAD. Read and accept the terms and conditions of the Software Download Rules. On the Enter Network Password window, enter your Cisco.com username and password and click OK. Click Save to download your image file to your hard disk. Select the desired download location on your hard disk and click Save. OL-8371-05 Cisco Aironet 1240AG Series Access Point Hardware Installation Guide 3-19