Cisco 6504-E User Guide - Page 406
Additional Notes Tab of the C6576M ACL Con Dialog Box
View all Cisco 6504-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 406 highlights
C6576M ACL Configuration Dialog Box Chapter 6 Logical Object Dialog Boxes Status Field • Source Port-The decimal number or name of a source TCP or UDP port. TCP port names can only be used when filtering TCP. UDP port names can only be used when filtering UDP. • Destination IP-Number of the network or host to which the packet is being sent. • Destination Mask-Bitmask used in combination with Destination IP to specify a host address or a range of addresses to apply filter. • Destination Operand-Comparison operator for destination TCP or UDP ports. • Destination Port-The decimal number or name of a destination TCP or UDP port. • Remark-Comment that describes the access list entry, up to 100 characters long. • Add Filter button-Appends a permit or deny filter to an ACL. The Status display-only field located at the bottom of the window indicates the current state of the object. This field has the following values: • decommissioned-CEMF is not actively monitoring the object attributes. • normal-Presence polling of the object. • normallostcomms-CEMF has lost communication with the device from the normal state. Additional Notes Tab Figure 6-91 shows the Additional Notes tab of the C6576M ACL dialog box. Figure 6-91 Additional Notes Tab of the C6576M ACL Configure Dialog Box 6-116 Cisco 6500/7600 Series Manager User Guide