Cisco AIR-AP1220B-A-K9 Hardware Installation Guide - Page 56
Overview, Unpacking the Radio - upgrade
UPC - 746320719191
View all Cisco AIR-AP1220B-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Overview Chapter 5 2.4-GHz Radio Upgrade Overview This section provides instructions for upgrading the access point 2.4-GHz radio. The following operations summarize the upgrade procedure: • Remove all cables and power connections from the access point. • Follow standard electrostatic discharge (ESD) procedures . • Place the access point on an ESD-protected work surface. • Open the access point's 2.4-GHz radio access cover. • For an access point without the 2.4-GHz radio feature, remove the blank spacer card. • For an access point with the 2.4-GHz radio feature, remove the existing 2.4-GHz card. • Install the new 2.4-GHz radio card. • Close the access point 2.4-GHz radio access cover. Caution ESD can damage the Cisco Aironet radio and the internal components of the access point. It is recommended that the 2.4-GHz radio upgrade procedures be performed by an ESD-trained service technician at an ESD-protected workstation. Unpacking the Radio Each 2.4-GHz radio is shipped with the following items: • Quick start guide • A product registration card • A T-10 tamper-resistant Torx L-wrench • A 2.4 GHz radio product compliance label If anything is missing or damaged, contact your Cisco representative for support. Cisco Aironet 1200 Series Access Point Hardware Installation Guide 5-2 OL-2155-02