Cisco AIR-AP1220B-A-K9 Hardware Installation Guide - Page 89

Appendix B Declarations of Conformity and Regulatory Information European Community, Switzerland, Norway, Iceland, and Liechtenstein The Declaration of Conformity related to this product can be found at the following URL: http://www.ciscofax.com For 11 Mbps, 2.4 GHz access points with 100 mW radios, the following standards were applied: • Radio: EN 300.328-1, EN 300.328-2 • EMC: EN 301.489-1, EN 301.89-17 • Safety: EN 60950 The following CE mark is affixed to the 11 Mbps, 2.4 GHz access points with 100 mW radios: Note This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate Compliance. Note Combinations of power levels and antennas resulting in a radiated power level above 100 mW equivalent isotropic radiated power (EIRP) are considered as not compliant with the above mentioned directive and are not allowed for use within the European community and other countries that have adopted the European R&TTE directive 1999/5/EC or the CEPT recommendation Rec 70.03 or both. For more details on legal combinations of power levels and antennas, refer to the Cisco Aironet 1200 Series Access Point Software Configuration Guide. For 54 Mbps, 5 GHz access points with 40 mW radios, the following standards were applied: • Radio: EN 301.893 • EMC: EN 301.489-1, EN 301.489-17 • Safety: EN 60950 The following CE mark is affixed to the 54 Mbps, 5 GHz access points with 40 mW radios: 49325 OL-2155-02 Cisco Aironet 1200 Series Access Point Hardware Installation Guide B-5