Cisco ASR1002 Configuration Guide - Page 361

Configuring Bridge Domain Interfaces The Cisco ASR 1000 Series Aggregation Services Routers support the bridge domain interface (BDI) feature for packaging Layer 2 Ethernet segments into Layer 3 IP. Finding Feature Information Your software release might not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Feature Information for Configuring Bridge Domain Interfaces" section on page 11. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required. Contents • Restrictions for Bridge Domain Interfaces, page 1 • Information About Bridge Domain Interfaces, page 2 • Creating or Deleting a Bridge Domain Interface, page 6 • Bridge Domain Interface Scalability, page 6 • How to Configure a Bridge Domain Interface, page 6 • Additional References, page 10 • Feature Information for Configuring Bridge Domain Interfaces, page 11 Restrictions for Bridge Domain Interfaces The following are the restrictions pertaining to bridge domain interfaces: • Only 4096 bridge domain interfaces are supported per system. Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA