Cisco CP-7962G Administration Guide - Page 41
Settings > Network, Configuration> IPv6 Configuration
View all Cisco CP-7962G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 1 An Overview of the Cisco Unified IP Phone Overview of Configuring and Installing Cisco Unified IP Phones Table 1-8 Checklist for Installing the Cisco Unified IP Phone 7962G and 7942G (continued) Task Purpose For More Information 6. If you are configuring the network settings on the See Configuring Startup Network Settings, page 3-14. phone for an IPv6 network, you can set up an IP See Network Configuration Menu, page 4-5. address for the phone by either using DHCPv6 or by manually entering an IP address. Using DHCPv6-To enable DHCPv6 and allow the DHCPv6 server to automatically assign an IP address to the Cisco Unified IP Phone and direct the phone to a TFTP server, choose Settings > Network Configuration> IPv6 Configuration and configure the following: • To enable DHCPv6, set DHCPv6 to Yes. DHCPv6 is enabled by default. • To use an alternate TFTP server, set IPv6 Alternate TFTP Server to Yes, and enter the IP address for IPv6 TFTP Server 1. Note Consult with the network administrator if you need to assign an alternate TFTP server instead of using the TFTP server assigned by DHCP. Without DHCP-You must configure the IP address, subnet mask and TFTP server locally on the phone, choose Settings > Network Configuration> IPv6 Configuration: To disable DHCP and manually set an IP address: a. To disable DHCPv6, set DHCPv6 to No. b. Enter the static IP address for phone. c. Enter the IPv6 prefix length. d. Set IPv6 Alternate TFTP Server to Yes, and enter IP address for IPv6 TFTP Server 1. You must also enter the domain name where the phone resides by Choosing Settings > Network Configuration. Note The Cisco Unified IP Phone supports having both IPv4 and an IPv6 address concurrently. You can configure Cisco Unified Communications Manager to support IPv4 devices only, IPv6 devices only, or to support both IPv4 and IPv6 devices concurrently. 7. Set up security on the phone. See Configuring Security on the Cisco Unified IP Phone, Provides protection against data tampering threats and page 3-14. identity theft of phones. OL-21011-01 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) 1-27